Technical information

How Do I Configure a Mylex Controller for the First Time?
1-30 RAID EzAssist User’s Manual
You’ll see the RAID EzAssist exit confirmation screen (Figure 1-27).
Figure 1-27. Do You Wish to Exit RAID EzAssist?
☞ Use the arrow key to select Yes, then press Enter to exit RAID
EzAssist. The system reboots. Begin operating system
installation if necessary, or allow your installed operating
system to boot.
☞ Refer to the Disk Array Controller Software Kit Installation
Guide and User Manual or your Mylex controller’s quick
installation guide for further instructions.