Technical information

How Do I Configure a Mylex Controller for the First Time?
1-24 RAID EzAssist User’s Manual
☞ To define logical drives at this time, use the arrow key if
necessary to select Yes, then press Enter.
■ Define Logical Drives.
Logical drives for the array(s) you just set up are defined from the Logical
Drive Definition screen (Figure 1-22).
Figure 1-22. Logical Drive Definition Screen
This screen uses the following navigation strategy:
• Arrow keys move among the logical drive definition fields.
• For RAID Level, Write Cache, and Stripe Size(KB) definition fields,
the Spacebar brings up a list of valid options. Arrow keys move among
the options and Enter selects an option.
• For RAID Level, Write Cache, and Stripe Size(KB) definition fields,
the + and - keys cycle through the valid options. When the desired
option is visible, use the arrow key to move to another field.
• For Physical Capacity or Logical Capacity definition fields, type a
numeric decimal value representing the desired capacity in GB. You
may choose one or the other field to adjust.
• The Tab key shifts control to the buttons, or from the buttons back to
the logical drive definition fields.
• When buttons are in focus, arrow keys select a button and Enter
activates the highlighted button. Arrow keys rotate selections through
Add Drive, Apply, Cancel, Clear New, and Delete Last.