Technical information

How Do I Configure a Mylex Controller for the First Time?
1-18 RAID EzAssist User’s Manual
Figure 1-15. RAID Configuration Details Screen
☛ Note
After viewing configuration details, press Enter to
select OK and return to the RAID Configuration
Summary screen.
☞ To apply the configuration, use the arrow key if necessary to
select Apply, then press Enter,
OR
☞ To cancel the configuration, use the arrow key to select
Cancel, then press Enter.
When you apply the new configuration, RAID EzAssist writes configuration
information to the Mylex controller. This takes a few moments, so a message
is displayed (Figure 1-16).
Figure 1-16. Writing RAID Configuration. Please Wait...
☞ Wait for the configuration information to be written to the
controller.