Technical information

How Do I Reassign a Host ID For PCI Controller Clustering?
5-18 RAID EzAssist User’s Manual
Arrow keys move among the options and Enter selects an option.
• In the HostID field, the + and - keys cycle through the valid options.
Stop when the desired option is visible.
• The Tab key shifts control to the buttons, or from the buttons back to
the HostID field.
• When buttons are in focus, arrow keys select a button and Enter
activates the highlighted button.
• At any time you can press Enter to accept the currently visible settings
and close the screen.
☞ With the HostID field selected...
☞ Press the + or - key to assign the desired ID setting to the
controller,
OR
☞ Press Spacebar to display a box of available choices, use the
arrow key to select your desired ID setting, then press Enter.
☞ Once you’ve selected the alternate ID setting, press Tab, then
press Enter with Ok selected.
☞ If you need to reassign Host IDs for other controllers, repeat
the entire procedure from the beginning with a different
controller selected.
☛ Note
You will need to reboot the system in order for the
host ID changes to take effect.