Technical information

How Do I Restore a Previously-Saved Configuration to a Controller?
5-10 RAID EzAssist User’s Manual
Figure 5-10. Restore Configuration
❑ Restore the Configuration to the Controller.
☞ Type the name of the file which contains the configuration,
type a drive letter if necessary, and press the Tab key.
☞ Insert the diskette into the floppy diskette drive and press
Enter with Ok selected to continue.
☞ Wait for the configuration information to be written to the
controller.
☞ Keep the diskette in a safe place in case you need it to restore
the configuration again.