Technical information

How Do I Update Controller Firmware or the RAID EzAssist Utility?
5-6 RAID EzAssist User’s Manual
Figure 5-7. Flash Process Status
RAID EzAssist loads the image file information to the controller and stores
it. You will still need to allow the controller to be programmed.
☞ Wait for the flash image storage to conclude.
Once the image file has been stored to the controller, RAID EzAssist will
automatically program the controller with the new image data. A message is
displayed (Figure 5-8).
Figure 5-8. Programming Controller
☞ Wait while the controller is programmed.
When the process is finished, the Flash Process Status screen will indicate
“ Flashing done” for each successfully updated controller.