Technical information

Monitoring and Maintenance Activities
Manual No. 775029 4-67
☞ Press Spacebar to display a box of available choices, use the
arrow key to select your desired bus width choice, then press
Enter.
Once you’ve set the properties as desired,
☞ Press Enter with Ok selected to accept the changes,
OR
☞ Use the arrow key to select Cancel, then press Enter to leave
the settings unchanged.
If you made any changes and selected Ok, the following Notice is displayed
(Figure 4-95).
Figure 4-95. Confirm Changes to Physical Drive SCSI Settings
☞ Press Enter with Yes selected to register the physical drive
configuration changes.