Technical information

How Do I Change SCSI Transfer Properties on a New PCI Controller?
4-66 RAID EzAssist User’s Manual
channel controller-not changeable)
Figure 4-94. Physical Device SCSI Properties Screen
☛ Note
Depending on the situation, some of the fields may be
READ ONLY. In most cases Tag Queuing will be
selectable, however.
☞ If Bus Speed (MHz) is changeable (cyan color), use the arrow
key to select the Bus Speed (MHz) field, then...
☞ Press the + or - key to find your desired bus speed (Async, 10
MHz, 20 MHz, 40 MHz, 80 MHz, etc.),
OR
☞ Press Spacebar to display a box of available choices, use the
arrow key to select your desired bus speed choice, then press
Enter.
☞ Use the arrow key to select the Tag Queuing field, then...
☞ Type in a new Tag value from 0 through 255.
☞ If Bus Width is changeable (cyan color), use the arrow key to
select the Bus Width field, then...
☞ Press the + or - key to find your desired bus speed (“8” =
Narrow, “16” = Wide),
OR