Technical information

Monitoring and Maintenance Activities
Manual No. 775029 4-49
How Do I Visually Locate a Physical Device?
RAID EzAssist has an option that allows you to see exactly where a
particular physical device is located in your hardware setup. Using Locate
Device, you can cause a selected physical device’s LED to blink.
☞ Use the arrow key to select Perform Administration on... on
the main menu, then press Enter.
The Administration menu is displayed (Figure 4-70).
Figure 4-70. Administration Menu - Physical Device
☞ Use the arrow key to select Physical Device, then press Enter.
❑ Select a Physical Device.
The first step is to select the physical device you wish to locate visually. You
do this from the Physical Drive Selection screen (Figure 4-71).
Figure 4-71. Physical Drive Selection Screen
This screen uses the following navigation strategy:
• Arrow keys move among the available physical devices.
• Enter selects the highlighted physical device.
☞ Use the arrow keys to select the physical device you want to