Technical information

Monitoring and Maintenance Activities
Manual No. 775029 4-47
Figure 4-67. Physical Drive Menu - Designate Drive as Spare/Unused
☞ On the Physical Drive menu, use the arrow key to select
Designate Drive as Spare/Unused, then press Enter.
■ Apply the Configuration to the Controller.
To add the physical drive you selected to the registered configuration, the
configuration changes need to be applied to the controller. At this point in
the process, a confirmation screen is displayed (Figure 4-68).
Figure 4-68. Designate Drive as Unused Confirmation
☞ To apply the configuration, use the arrow key to select Yes if
necessary, then press Enter.
OR
☞ To cancel the configuration change, use the arrow key to
select No if necessary, then press Enter.
When you apply the new configuration, RAID EzAssist writes configuration
information to the Mylex controller and drives. This takes a few moments, so