Technical information

How Do I Designate a Physical Drive as a Spare, or Reset a Spare Drive as Unused?
4-46 RAID EzAssist User’s Manual
necessary, then press Enter.
OR
☞ To cancel the configuration change, use the arrow key to
select No if necessary, then press Enter.
When you apply the new configuration, RAID EzAssist writes configuration
information to the Mylex controller and drives. This takes a few moments, so
a message is displayed (Figure 4-65).
Figure 4-65. Writing RAID Configuration. Please Wait...
☞ Wait for the configuration information to be written to the
controller and drives.
❑ Option 2: Return a Spare Drive to Unconfigured
(Unused) Status.
Figure 4-66. Physical Drive Selection Screen
☞ In the Physical Drive Selection screen (as in Figure 4-66,for
example) use the arrow keys to select a spare drive to return to
unconfigured (unused) status, then press Enter.
The Physical Drive menu is displayed (Figure 4-67).