Technical information

How Do I Rebuild Redundancy Data Onto a Logical Drive?
4-24 RAID EzAssist User’s Manual
❑ Select a Logical Drive.
The first step is to select the logical drive that is in critical mode. You do this
from the Logical Drive Selection screen (Figure 4-33).
Figure 4-33. Logical Drive Selection Screen
This screen uses the following navigation strategy:
• Arrow keys move among the available logical drives.
• Enter selects the highlighted logical drive.
☞ Use the arrow keys to select the logical drive with Critical
status, then press Enter.
❑ Enter the Logical Drive Advanced Options Menu.
The Logical Drive menu is displayed (Figure 4-34).
Figure 4-34. Logical Drive Menu - Advanced Options
☞ Use the arrow key to select Advanced Options, then press
Enter.