Technical information

Monitoring and Maintenance Activities
Manual No. 775029 4-5
monitor, then press Enter.
The Disk Array menu is displayed (Figure 4-4).
Figure 4-4. Disk Array Menu - View Array Configuration
Press Enter with View Array Configuration selected.
View Disk Array Status and Information.
The Disk Array Configuration screen for the selected array is displayed
(Figure 4-5). This screen shows the following information:
The channel, ID, vendor, model, version, capacity (GB), and status of
all physical drives that comprise the selected disk array.
The total capacity of the disk array.
The total used and unused capacity in the disk array.
Figure 4-5. Disk Array Configuration Screen
(Optional): If a small down-arrow is displayed beside the
physical drive field, press PgDn to view additional drives in the
disk array. Press PgUp to move up the list.
Press Enter with Ok selected to close the Disk Array
Configuration screen.