Technical information

How Do I Change Startup Properties for a Controller?
3-16 RAID EzAssist User’s Manual
request is issued to the array. Delay values range from 0 to 30 in six second
increments.
☞ Use the arrow keys to select the Initial Delay (seconds) field,
then type the desired numeric value for the number of seconds
of initial delay.
❑ View/Modify the Delay Between Spins Setting.
Default = 0
This specifies the number of seconds between consecutive device spin-up
cycles.
☞ Use the arrow keys to select the Delay Between Spins
(seconds) field, then type the desired numeric value for the
number of seconds of delay between spins.
❑ Accept or Cancel Your Startup Property Changes.
☞ To accept your Startup property changes, press Enter with Ok
selected, then press the arrow key to select Yes at the “Save
Changes?” screen and press Enter,
OR
☞ To cancel any changes you’ve made, press the Esc key, or
press the Tab key, the arrow key to select Cancel, then press
Enter.