Technical information

How Do I Change Startup Properties for a Controller?
3-14 RAID EzAssist Users Manual
Enter the Startup Properties Screen.
When the Properties menu is displayed, use the arrow key to
select Startup, then press Enter.
The Startup Properties screen is displayed (Figure 3-9).
Figure 3-9. Startup Properties Screen
This screen uses the following navigation strategy:
Arrow keys move among the startup property fields.
For the Disk Spin Up field, the Spacebar brings up a list of valid
options. Arrow keys move among the options and Enter selects an
option.
For the Disk Spin Up field, the + and - keys cycle through the valid
options. When the desired option is visible, use the arrow key to move
to another field.
For Number of Disk Drives per Spin, Initial Delay (seconds), and
Delay Between Spins (seconds) fields, type a numeric value
representing the desired setting.
The Tab key shifts control to the buttons, or from the buttons back to
the startup property fields.
When buttons are in focus, arrow keys select a button and Enter
activates the highlighted button.
At any time you can press Enter to accept the currently visible settings
and close the screen.
View/Modify the Disk Spin Up Setting.
Default = By Controller