Technical information

How Do I Change Global Properties for a Controller?
3-8 RAID EzAssist User’s Manual
desired,
OR
☞ Press Spacebar to display a box of available choices, use the
arrow key to select your desired setting, then press Enter.
❑ View/Modify Background Process Rate.
Default = 50
The Background Process Rate is a relative indication of how much time the
controller devotes to a rebuild, add capacity (MORE), or background
initialization operation. Integer values from 0-50 can be defined in multiples
of 10. For low priority and high array performance, specify a value of 0. For
high background process rate (with reduced array performance during),
select 50.
☞ Use the arrow key to select the Background Process Rate (%)
field, then...
☞ Press the + or - key to select the desired numeric value for
background processes,
OR
☞ Press Spacebar to display a box of available choices, use the
arrow key to select your desired value, then press Enter.
❑ Previous Controllers: View/Modify the Active Negation
Setting.
Default = Disabled
Enable for cleaner SCSI signal transmissions.
☞ Use the arrow key to select the Active Negation field, then...
☞ Press the + or - key to set the value to Enabled or Disabled as
desired,
OR
☞ Press Spacebar to display a box of available choices, use the