Technical information

Drive Configuration
Manual No. 775029 2-61
Figure 2-62. Sample Disk Array Configuration
☞ If you’re not satisfied with your drive selections, use the
arrow key to select Clear, then Press Enter. Press Tab to return
to Unused Drives.
Your selections will be erased and you can try again as described above.
☞ To save the array you’ve set up, press Enter with Save Array
selected.
A Notice is displayed at this point as shown in Figure 2-63.
Figure 2-63. Define Logical Drives or Return to Disk Array Set-Up
“Do you want to define logical drives now?”
For spanning, the answer is NO, because you must have at least two disk
arrays with equal numbers of drives for spanning to be allowed.
☞ To build additional disk arrays, use the arrow key if necessary