Installation guide

Hardware

Manual No. 775030 3

Figure 2. AcceleRAID 250 with Component Locations

Figure 3. Pinout for JP1 on the AcceleRAID 250

3. Plug the AcceleRAID 150 or 250 card into an available PCI slot (see

Figure 4).

Table 2. AcceleRAID 250 Jumpers

Jumpers Description

JP1 Header for SCSI activity & Cache Dirty LEDs

JP4 Mylex use only

JP5 Not used

JP10 Off for standard – On for SISL

Jumper on Jumper off

Jumper removed and

placed over a single

pin for safekeeping

JP4

JP5

JP10

Internal Connector

(68-Pin High Density)

Note: J1 and J2 are both on the same Channel.

External

Connector

(VHDCI)

JP1

Channel

Activity

LED*

Cache

Dirty

LED*

JP1,

LED

Connector

*Activelow