Installation guide

Operating Systems and Drivers
Manual No. 775030 19
4. Watch for the status screen that displays the drivers found for storage
adapters:
• Select Modify
• Select Storage Adapters
• Delete the MDAC.HAM line entries
5. Press the Insert key two times in order to add new drivers from another
source. Insert the NT/NW drivers diskette into the floppy disk drive
when the installation program prompts you to insert the vendor-
supplied disk. The installation program will scan the diskette for all
available drivers. Select the NetWare 5.0 driver from the list.
MDAC.HAM
• Select the appropriate location for the new drivers (e.g. floppy, etc.).
• Press Return.
• MDAC.HAM will be added from Software Kit 2.1.
6. After the NetWare 5.0 installation is complete, copy the files in the
\NW subdirectory of the NT/NW drivers diskette to SYS:SYSTEM of
the NetWare 5.0 server.
7. Return to the driver summary by pressing the arrow keys and select the
option to continue.
8. Netware 5.0 will continue the installation.
9. Watch for another status screen that displays the storage devices
(i.e., SCSIHD.CDM and SCSICD.CDM) and the network drivers:
• Select Modify
• Select Storage Devices
• Press the Insert key
• Select NWASPI.CDM (this driver is required to load GAM)
•Press Enter
• Return to the driver summary by using the arrow keys.