Installation guide

RAID Configuration
Manual No. 775030 13
5. The following options appear:
Automatic
Assisted
Custom
Select Automatic. Press Enter.
☛
Note
The Scope of this Quick Reference Guide only covers
Automatic Configuration. For information on
performing Assisted or Custom RAID configurations,
refer to the RAID EzAssist Configuration Utility User
Reference Guide (P/N 775029).
A summary display of the configuration will appear. Up to 5 lines will be
displayed. If more than 5 SCSI drives are physically connected to the
controller, press Page Down to see up to 5 more lines.
6. Select Apply. Press Enter.
The Array will be automatically configured. The program will indicate that
Automatic Configuration is in progress until the configuration finishes.
Upon completion, the following prompt will be displayed:
RAID drive configuration is successful.
You may utilize this drive immediately.
[Reboot] Main Menu
7. Select Main Menu and press Enter if you want to further examine the
configuration.
Or Select Reboot and press Enter to restart your system.
Go on to “Operating Systems and Drivers” on page 14.