Installation guide

RAID EzAssist Configuration Utility Sequence
3-6 AcceleRAID 150 Installation Guide
RAID EzAssist Configuration Utility Sequence
After the BIOS options have been set as desired, do the following:
1. Power ON the computer (or allow the computer to restart normally
after the BIOS options have been set).
2. Watch the messages on the screen for the following prompt to be
displayed:
Press <ALT-M> for BIOS options
3. Wait approximately 5 seconds. Do not press any keys at this time.
4. Watch the messages on the screen for the following prompt to be
displayed:
Press <ALT-R> for RAID Configuration options
5. Press Alt–R to get into the BIOS Configuration Utility.
☛
Note
For detailed information on how to run the RAID
EzAssist Configuration Utility, refer to the RAID
EzAssist Configuration Utility User Reference Guide
(P/N 775029).