Installation Guide

15 www.mylenstairs.com
5. The platform is reversible and will work with left hand up and right hand up
stairs. Identify and mark which side of the platform will be facing up and
which side will be facing down.
6. After marking the platform, remove it from the stair and fasten the
mounting brackets (14) to the bottom surface in locations shown below.
The brackets should be mounted flush to the edge of the platform. For a
wood laminate platform drill small 3/16” pilot holes in the locations for the
lag bolts (H). DO NOT DRILL THE PILOT HOLES COMPLETELY THROUGH THE
PLATFORM. Loosely secure the platform mount brackets to the bottom of
the platform with hardware (F) and (H).