Installation Guide

19 www.mylenstairs.com
6. Start at the bottom baluster of the stair and slide the line rail cups (23) onto
the lowest line rail mount and partially tighten the set screws closest to the
baluster. The set screws should be tight enough to allow the line rail cups
to still rotate.
7. Take a coiled section of stainless steel line rail (24) and insert it through the
line rail cup installed in Step 6. Tighten the set screws to lock the line rail in
place.
8. Slide a line rail cup down the line rail and secure it to the next baluster.
Repeat this for the rest of the balusters. Tighten all the set screws after the
line rail is installed.
NOTE: Only install the first line rail. The balusters now need to be fastened to
the floor, treads, and platform.