User Manual
13
Appendix C: Technical Specications
Dimensions 180x160x45mm / 7x6.3x1.8inch
Weight 720g / 1.6lb
Clock Stability 0,5PPM
GPS Receiver quick x, -160dB, 15nS
GPS antenna connection SMA, active
Dual Decoding circuitry up to -100dBm sensitivity, TranX3 and X2 transponder
range
Timing Resolution 0,0001s
Loop Telemetry 32kbps, 8 bytes per hit
Loop connection 1x BNC, max. 20m loop
Operating temperature range -20 to 50 C / -4 to 122F
Humidity range 10% to 90% relative
Operating voltage range 10 to 14.4V, Typical 12V
Power consumption Appr. 5W
Network Interface 10-100BT (RJ45)
Auxiliary connections 1x 5VDC, 100mA, output
1x Opto coupled closing contact,
max 50mA, output
3x Opto coupled, 5-12VDC / 5-15mA, inputs
Auxiliary connector DB15, Female
Digital ouputs:
Number of connections 1•
Opt1 DB15 pin 14(+) and pin 4(-)•
Isolation Opto coupled photo-transistor•
Signal type Closing contact•
Max. switched current 50mA (DC)•
Max. switched voltage 70V (DC)•
Digital inputs:
Number of connections 3•
PhotoCell DB15 pin 7(+) and pin 6(-)•
ExtSt DB15 pin 13(+) and pin 12(-)•
Sync DB15 pin 11(+) and pin 10(-)•
Isolation Opto coupled photo-transistor•
Timestamp accuracy 0.0001 second•
Required drive current (high) 10mA•
Switch voltage range 5-12VDC•