Quick Start Guide

QUICK START GUIDE
BASELINK
2
CONNECTING
Connect the X2 BaseLink to the X2 Server.
Then enable the Onboard Feed to use the
Baselink to send messages to the Racers.
Use Orbits 5.3 or higher (or other supported
3rd party software).
A
Connect X2 server to the Timing Software
B
Connect to the X2 BaseLink*
* If you can’t nd the X2 BaseLink check the “not congured” section
Go to the Distribution tab (green = on, red = o)
C
Enabling the Onboard Feed
Click the Onboard Feed section to open the Settings window
D
Open the Onboard Feed Setting
E
Check the Enable Onboard Feed Checkbox
F
Check Onboard Feed and online App Feed status
4