User manual

- 14 -

14.TIMER

15.CALLS

I TO USE THE TIMER

• Open the Timer app

• Set the countdown length by tapping on the hours, minutes or/and seconds area.

The selected area will turn purple

• Swipe up and down to adjust the countdown. Then press the start button to start

the timer.

• At the end of countdown, your watch will alert you with sound and vibration.

The ZeNeo calls features allow you to dial a number, see the caller ID & calls history,

answer and reject an incoming call directly from your wrist.

In order to enjoy all these features, you must ensure that the BT 3.0 is connected with

your smartphone (refer to 6. Pairing section for more details).

Once it is paired, you will be able to enjoy the following features

I ANSWER / REJECT / REPLY PHONE CALLS ON ZENEO

When you hear or see the call notiﬁcation, raise your wrist to see who’s calling:

• Reset a call and send to voice mail: Tap the red Reject button in the incoming call

notiﬁcation

• Answer on your ZeNeo: Tap the green answer button in the incoming call

notiﬁcation

• Send a text message (Android only): Tap on the top area to select one of the

predeﬁned replies

While you’re on a call:

• Adjust the call volume: Tap on the - or + buttons

• Hang up a call: Tap on the red Hang up button

• Mute the mic: Tap on the Mute button

To see the caller ID, make sure that the contact is saved on your phone.