ZeNeo+ -USER GUIDE-
TA B L E O F C O N T E N T S GET STARTED 1. What’s in the box 2. Overview 3. Charging 4. Basic operations 5. Wearing 6. Shortcuts 03 03 04 05 06 06 PAIRING 7. Pairing 8. Firmware update 07 09 ACTIVITY TRACKING 9. Activity 10. Goals 11. Heart rate 12. Sleep 13. Body temperature 14. Timer 09 10 11 13 13 16 CONNECTED FEATURES 15. Calls 16. Voice command 17. Notifications 18. SMS 19. Weather 20. Find my phone 21. Camera remote 22. Music control 23. Anti-lost 24.
1 . W H AT ’ S I N T H E B OX ZENEO+ CHARGING CRADLE GET STARTED GUIDE + 2 .
3. CHARGING Charge ZeNeo+ for one hour and a half before your first use. 1. Plug the charging cable into the USB port on your computer or a certified USB wall charger. 2. Place ZeNeo+ in the charging cradle. 3. A battery indicator will fill to indicate charging is in progress. While the watch charges, double tap the screen to check the battery level. 4. Once ZeNeo+ is fully charged, the battery indicator will be full. i It takes about 1 hour and a half to fully charge ZeNeo+.
4 .
5 . WEARING I D AILY WEAR For all-day wear, we recommend you to wear ZeNeo+ a finger’s width above your wrist bone. I E XERCISE & WORKOUT During our workout, we suggest you to wear ZeNeo+ higher on your wrist for recording more accurate heart-rate reading. • Make sure ZeNeo+ is in contact with your skin. • Wear ZeNeo+ on your non-dominant hand. • Do not fasten the wristband too tight for better comfort and not to restrict bloodstream. 6 .
. PAIRING Get the MyKronoz App When turning On your ZeNeo+ for the first time, you’ll be prompted to download the MyKronoz mobile app on your smartphone in order to proceed to its initial set up. - iOS - - ANDROID - iOS9+ devices with Bluetooth® 4.0 BLE iPhone 4s, 5, 5c, 5s, 6, 6 Plus, 7, 7 Plus, 8, 8 Plus, X, XR, XS, XS Max, SE, 11, 11 Pro, 11 Pro Max, 12, 12 mini, 12 Pro, 12 Pro Max Select Android 6.0+ devices that support Bluetooth® 4.
QR code pairing • During the first setup, a QR code will appear on the watch screen • To pair your device with your phone, put the QR code on ZeNeo+ into the viewfinder (MyKronoz App) • When ZeNeo+ is successfully paired, you will be notified on your mobile phone’s screen. Tips & tricks Normal pairing: Tap on the center of the watch face screen 3 times to reveal the QR code on the watch screen.
8 . FIRMWARE UPDATE MyKronoz will provide regular firmware updates which you will need to install in order to access our latest upgrades and features for your watch. With ZeNeo+, all these updates need to be done by OTA (Over The Air) and through the mobile app. Updates are performed over the air using the mobile app. Before updating, make sure your phone and your watch have more than 30% battery.
I VIEW YOUR STATS ZeNeo+ tracks throughout the day: • Number of steps taken • Distance travelled • Calories burned • Active minutes You can view your daily activity in realtime from your device. You can also monitor your activity data and history from the MyKronoz Mobile App. On the main activity screen, you can check your performance level against your daily goals. Click on any activity bar to get a detailed graph of your daily, weekly and monthly performance. i The activity tracker resets at midnight.
I SET GOALS FROM THE WATCH • Go to the Activity interfaces • Long press the screen data for which you want to adjust your goal and confirm On each activity screen of your ZeNeo+, a progress bar will show how close you are to your daily goal. Once you hit one of your daily goals, ZeNeo+ will gently vibrate and display a Goal achieved interface. i We recommend you to set ambitious but realistic goals in order to keep a healthy daily activity.
I MANUAL MODE • Securely attach your ZeNeo+ around your wrist. • Go to the Heart rate menu of your watch. • Touch the red button to start measuring your heart rate. It will take about 10 seconds to get the results displayed on your watch screen. I AUTO HEART RATE TRACKING • Go to the Settings tab of your mobile App • Click on Heart rate • Enable Auto track and set the frequency Once activated, two green LED lights will start flashing on the back of the device.
1 2 . SLEEP ZeNeo+ tracks the hours slept and the quality of your sleep. I START/EXIT SLEEP MODE MANUALLY • Press the sleep app icon of the ZeNeo+ main menu • Press on the Start icon to enable sleep monitoring • Press on the End icon to stop sleep monitoring I SLEEP GOALS FROM YOUR WATCH • The sleep goal is 8 hours by default • Long press the screen to set up your daily sleep goals to your most suitable length • Set the hour first. Then validate. • Set the minute and confirm.
1 3 . BODY TEMPERATURE MEASURE YOUR BODY TEMPERATURE WITH ZENEO+ 41 40 39 38 37 36 °C 36.8 Thanks to its temperature sensor, ZeNeo+ can automatically measure and track your body temperature throughout the day and alert you if your temperature exceeds the normal range. Using sophisticated algorithms and a precisely calibrated sensor, ZeNeo+ measures the wrist temperature and converts this temperature to display accurate body temperature.
37.1°C Normal body temperature readings will vary within these ranges due to multifactorial elements, such as taking medication, age, physical activity, time of day and even a menstrual cycle, can cause the body temperature to vary by one degree. In adults, the following temperatures suggest that someone has a fever: • at least 100.4°F (38°C) is a fever • above 103.1°F (39.5°C) is a high fever • above 105.
1 4 . TIMER I TO USE THE TIMER • Open the Timer app •S et the countdown length by tapping on the hours, minutes or/and seconds area. The selected area will turn purple •S wipe up and down to adjust the countdown. Then press the start button to start the timer. • At the end of countdown, your watch will alert you with sound and vibration. 1 5 . CALLS The ZeNeo+ calls features allow you to dial a number, see the caller ID & calls history, answer and reject an incoming call directly from your wrist.
1 6 . VOICE COMMAND The voice command allows you to remotely control your phone, search for information or send a quick command. To enjoy this feature, make sure that the BT 3.0 is connected with your smartphone (refer to 6. Pairing section for more details).
1 7 . NOTIFICATIONS ZeNeo+ shows notifications of incoming calls, SMS, email, social media activity & emails. I SETTING UP NOTIFICATIONS FOR ANDROID USERS • Open the MyKronoz App • Tap on the Settings tab •S elect Notifications to select the notifications you want to receive onto your ZeNeo+. If you wish to disable certain notifications types, swipe the selection button to the left.
1 8 . SMS From the Messages menu, you can easily read and reply to your SMS. I QUICK REPLY (ANDROID ONLY) Z eNeo+ allows you to reply using emojis or preset short answers directly from your watch. The reply button appears at the end of the SMS. To delete all your SMS notifications, go on the SMS list and long press the screen. To erase a specific SMS, select the message and slide it to the left with your finger 1 9 .
2 0 . FIND MY PHONE If you misplace your phone, the Find my phone function will make your phone ring or/and vibrate so you can easily find it. To use this feature, ensure your phone and watch are within range of each other (10m). I TO ENABLE THIS FEATURE • Press the find my phone app icon in the watch shortcuts or in the main menu page (or Apps menu), select Find my phone app and click on the screen to enable or disable it. 2 1 .
2 2 . MUSIC CONTROL With ZeNeo+ you can take control of your favorite music player like Deezer, Spotify and YouTube on your smartphone. I TO CONTROL MUSIC • First start the player on your phone • Go into the Music app on your ZeNeo+ • Play, pause, skip tracks and adjust volume straight from your wrist i On your ZeNeo+, you can see information about the track currently playing, like the artist or track name (Android only). 2 3 .
2 4 . APPS Several applications can be found in this menu: • Reminder • Calendar • Stopwatch • Timer • Camera remote • Find my phone 2 5 . ALARM To wake you up in the morning, or alert you at a certain time of the day, you can set up alarms that gently vibrate and ring at the chosen time. I TO SET AN ALARM FROM THE WATCH • Go to the Alarm app icon • Click on the top area to edit a new alarm • Set the alarm time, sound and day • Then confirm To dismiss the alarm, press the button.
2 6 . REMINDERS Several applications can be found in this menu: I TO SET A REMINDER FROM THE WATCH • Go to the Reminder app icon • Click on the top area to edit a new reminder • Set the reminder time, type, sound and day • Then confirm To dismiss the reminder, press the button. ZeNeo+ will gently vibrate and display the corresponding reminder icon to alert you. A single press on the ZeNeo+ button helps dismisses the reminder. If not dismissed, the same alert will repeat every 2 minutes.
2 8 .
2 9 . UNPAIR, RESET, UPDATE & DELETE ZeNeo+_90D2 I UNPAIR If you want to pair your ZeNeo+ with another smartphone, pair another MyKronoz device, give it to another person or return it, go to the MyKronoz App > Settings menu > Click on Paired watches > Click on Unpair. For iOS users, make sure to forget the device from the Bluetooth® settings of your phone. I UPDATE Make sure to update your ZeNeo+ to get the latest improvements and device updates.
3 0 . TECH SPECS Dimensions 52,6 x 23,8 x 12,3 mm Weight 32 g Display size and resolution IPS-LCD 1.14” / 134 x 240 px Material Polycarbonate, aluminium, silicone Battery type Lithium polymer 220 mAh Battery life Up to 4 days Bluetooth® BT 3.0 + BLE 4.
WARNING I Connecting the built-in USB port improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. Unplug ZeNeo+ when it is fully charged. I ZeNeo+ unit and charging dock contain strong magnets that may interfere with pacemakers, credit cards, watches and other magnet-sensitive objects. If you use a pacemaker or any other electronic medical device, please consult your physician before wearing or handling ZeNeo+.
SAFETY INSTRUCTIONS Before using the device, read these instructions carefully. •Z eNeo+ has built-in batteries. Do not disassemble the battery on your own. KRONOZ LLC is not responsible for any damage or personal injury caused by the removal of the battery or any component. •D o not expose your product to extremely high or low temperatures. Excessive temperature during charging could cause heat, smoke, fire or deformation of the battery or even explosion.
REGULARY NOTICE USA FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTIONS Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
RF EXPOSURE STATEMENTS This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Cet appareil est conforme aux exigences d’exposition RF de l‘ISED RSS-102 définies pour un environnement non contrôlé et est sûr pour le fonctionnement prévu comme décrit dans ce manuel.
DISPOSAL AND RECYCLING INFORMATION After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country.
JOIN US @MYKRONOZ m y k r o n o z .
