User manual

34
Operation
1236
..Connecting the myintercom video door intercom
LAN connection
The LAN connection is generally in the form of an
RJ-45 plug (
). It is also possible to connect the
individual leads directly to a terminal strip ( );
in accordance with EIA/TIA 568 B, the network is
connected to the terminals as follows: 3 (green-
white), 6 (green), 1 (orange-white) and 2 (orange)
whereby the number denotes the respective pin
of the RJ-45 plug or socket.
Power supply
Power is supplied to the myintercom video
door intercom via the Behnke 15V power
supply. The use of any other power supply is
not permitted.
Switch output
Potential-free output for controlling a door
opener, maximum load 24V, 2A.
12V ~ 1A output
Power supply for door opener
Switch output
Potential-free output for controlling an external
door bell (recommended), maximum load 20V, 2A
Instructions for myintercom
If power supply for door opener is not available
on site:
If power supply for door opener is available
on site:
Connecting an external door bell:
TÖ
TÖ
Ext. door opener power
supply, Max. 24V, 2A
bell transformer (on site)
door bell
(on site)
Ext. door open button
(on site)
Ext. door open button
(on site)
* TÖ = Door opener
* TÖ = Door opener
GB