Operation Manual

95
NAVIGATION DEVICE AND PC
To be able to copy data to the SD card, your PC must have access to this SD card.
The SD Card – Interface between the Navigation Device and the PC
You can transfer data to your navigation device via the SD card or via a USB connection. This
allows you to store additional maps, pictures, videoclips, movies and games. Simply establish a
connection between your SD card and the PC (the PC acts as a data source) or connect the
navigation device and the PC by using a USB cable. An SD card reader is required (unless your
PC or notebook already features a built-in card reader) or a Mini USB cable. To use a card
reader, perform the following steps.
 Purchase an SD card reader for USB port.
 Connect the card reader to the PC.
 Insert the SD card into the card reader.
 Copy the desired data onto the SD card.
 Eject the SD card and insert it into the navigation device.
 Now you can access the new data.
 To use a USB connection, perform the following steps.
 Connect the Mini USB cable.
 Turn the PC and the navigation device on.
 Copy the desired data onto the SD card.
 Disconnect the USB cable.