Operation Manual

59
SETTINGS MENU
Settings Menu Overview
3D Map
If the LED in the 3D Map switch lights up, the
map will be displayed in 3D. You may also
switch to 3D view by tapping on the Increase/
Decrease virtual height buttons. The Decrease
virtual height button will finally deliver a 2D
view.
Night Mode
Enable or disable the night mode if you don't
want to use the automatic switching of the
colour systems (in the above figure the option is
disabled).
Good to Know
When using this option, the Automatic Night
Colours feature will be disabled. You can
enable it again via Settings => General.