Operation Manual

50
Start
You can set the Cursor position as the starting
point of your route. This menu item will only be
available in map mode and only when no active
route has been selected. In Cockpit mode, the
start point will always be the current GPS
position or – if no GPS position can be obtained
– the last known GPS position.
Inserting Waypoints
By inserting the selected map point as a
waypoint, you will have to go to this point before
going to your destination. This allows you to
define a route with several waypoints in
reversed order (this is useful when you want to
"go to A but refuel at B" or if you want to
influence the route itinerary). This menu item is
available only after a route has been activated.
Deleting Intermediate Points
Removes the intermediate point next to the
cursor. The route will be recalculated without
this point. This menu item will appear instead of
"Add Via" and is only available if the cursor is
located near an intermediate point.