Operation Manual

For reduced map views no icons are displayed.

Once you zoom in, at the POI position small dots

will appear. When zooming in further, the icons will

appear.

If two points are located too close to each other so

that the icons overlap, a Multi-POI icon will be

shown instead of several individual icons. Enlarge

the view in order to display the icons separately.

(If both POIs have the same icon, this icon will

appear instead of the Multi-POI icon.)

Active Route Elements

 Your programme uses a routing system made

up of many waypoints. It consists of a starting

point, a destination, the line of the current

route segment as well as optional waypoints

and inactive partial routes. All these appear

on the map. The starting point, the waypoints

and the destination point are marked by flags.

 Animated arrows will indicate any enroute

events apart from the above-mentioned

points. These arrows show the direction in

which the journey will continue.

 An active route segment is the part of the

route where you are currently located. If no

additional waypoints have been defined, the

active route segment is equal to the entire

route. If waypoints have been defined, the

active route segment is the segment from

your present position to the next waypoint.

During the day, the active route segment will

appear in bright green, at night in red.