Operation Manual

11
5. Test by holding on windscreen
Hold the pre-assembled system on
the windscreen to test, note the
position if necessary and place the
arm in the desired position.
6. Closing the Snap Lever
After you have determined the best
position for the device, press the
suction pad strongly onto the
previously-cleaned position of the
windscreen and swing the snap lever
forwards. The suction pad will adhere
firmly.
7. Opening the Snap Lever
To uninstall your navigation device,
open the snap lever by pulling it
backwards (see arrow).
8. Releasing the Suction Pad
Pull from the rubber latch to release
the suction pad from the window.