Operation Manual

10
Installing Your Device in a Vehicle
1. Optimal mounting
The device must be fitted with the car
holder on the windscreen (the lightest
areas of the windscreen) and must
under no circumstances obstruct the
vision of the driver or the functioning
of the airbags.
2. Car mount
The major components of the car
holder are:
 Suction pad
 Snap lever
 Adjustable articulation
 Device retaining plate
 Clamps
3. Adjusting car holder
As the arm is quite rigid it is
recommended that you already put it
in its final shape prior to mounting the
holder.
4. Latching the car holder into
place
Put the hook of the car holder
retaining plate underneath and latch
the car holder on to the back of the
device.