User manual

Using the Web-Based Advanced User Interface
54
4. Under the “Wireless Networks” tab, click the “Configure” button
and you will see the following screen.
5. For a home or small business user, select “WPA-PSK” under
“Network Authentication”.
Note: Select “WPA” if you are using this computer to connect to a
corporate network that supports an authentication server such as a radius
server. Please consult your network administrator for further information.
6. Select “TKIP” or “AES” under “Data Encryption”. This setting will have
to be identical to the Router that you set up.
7. Type in your encryption key in the “Network key” box.
Important: Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
8. Click “OK” to apply settings.
Downloaded from www.Manualslib.com manuals search engine