User manual

Using the Web-Based Advanced User Interface
50
128-Bit WEP Encryption
Note to Mac users: The passphrase option will not operate with
Apple AirPort. To configure encryption for your Mac computer, set the
encryption using the manual method described in the next section.
1. Select “128-bit WEP” from the “Security” menu’s “Security Mode”.
2. After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually, or you can put a check mark in
“Passphrase”, then type in your passphrase. Click “Generate” to
generate the hex keys.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 hex keys.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
3. Click “Apply Changes” to save the setting.
WARNING: If you are configuring the Wireless G Router from a computer
with a wireless client, you will need to ensure that security is turned
ON for this wireless client. If this is not done, your client will lose its
wireless connection.
Downloaded from www.Manualslib.com manuals search engine