User manual

49
2
1
3
4
5
6
section
Using the Web-Based Advanced User Interface
7
8
9
10
WEP Setup
64-Bit WEP Encryption
1. Select “64-bit WEP” from the “Security” menu’s “Security Mode”.
2. After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually, or you can put a check mark in
“Passphrase”, then type in your passphrase. Click “Generate” to
generate four different hex keys.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
3. Click “Apply Changes” to save the setting.
WARNING: If you are configuring the Wireless G Router from a computer
with a wireless client, you will need to ensure that security is turned
ON for this wireless client. If this is not done, your client will lose its
wireless connection.
Downloaded from www.Manualslib.com manuals search engine