User manual

Using the Web-Based Advanced User Interface

Changing LAN Settings

All settings for the internal LAN setup of the Router can be viewed

and changed here.

(1)

(2)

(3)

(4)

(6)

(5)

1. IP Address

The “IP address” is the internal IP address of the Router. The default

IP address is “192.168.2.1”. To access the Web-Based Advanced User

Interface, type this IP address into the address bar of your browser. This

address can be changed if needed. To change the IP address, type in the

new IP address and click “Apply Changes”. The IP address you choose

should be a non-routable IP.

Examples of a non-routable IP are: 192.168.x.x (where x is anywhere

between 0 and 255), and 10.x.x.x (where x is anything between 0 and 255).

2. Subnet Mask

There is no need to change the subnet mask. This is a unique, advanced

feature of your MyEssentials Router. It is possible to change the subnet

mask if necessary; however, do NOT make changes to the subnet

mask unless you have a specific reason to do so. The default setting is

“255.255.255.0”.

Downloaded from www.Manualslib.com manuals search engine