User manual

29
2
1
3
4
5
6
section
Using the Web-Based Advanced User Interface
7
8
9
10
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static IP address connection type is less common than other
connection types. If your ISP uses static IP addressing, you will need
your IP address, subnet mask, and ISP gateway address. This information
is available from your ISP or on the paperwork that your ISP left with you.
Type in your information, then click “Apply Changes” (5). After you apply
the changes, the “Internet Status” indicator will read “connection OK” if
your Router is set up properly.
(1)
(2)
(3)
1. IP Address
Provided by your ISP. Enter your IP address here.
2. Subnet Mask
Provided by your ISP. Enter your subnet mask here.
3. ISP Gateway Address
Provided by your ISP. Enter the ISP gateway address here.
Downloaded from www.Manualslib.com manuals search engine