User manual

Using the Web-Based Advanced User Interface
28
Setting your Internet Service Provider (ISP) Connection Type
to Dynamic IP
A dynamic connection type is the most common connection type used with
cable modems. Setting the connection type to “dynamic” in many cases is
enough to complete the connection to your ISP. Some dynamic connection
types may require a host name. You can enter your host name in the space
provided if you were assigned one. Your host name is assigned by your ISP.
Some dynamic connections may require that you clone the MAC address of
the PC that was originally connected to the modem.
Change WAN MAC Address
If your ISP requires a specific MAC address to connect to the service, you
can enter a specific MAC address or clone the current computer’s MAC
address through this link.
Downloaded from www.Manualslib.com manuals search engine