User manual
11
2
1
3
4
5
6
section
Knowing your Router
7
8
9
10
3.
These LEDs are labeled 1–4 and correspond to the numbered ports
on the rear of the Router. When a computer is properly connected to
one of the wired computer ports on the rear of the Router, the LED will
light. GREEN means a 10Base-T device is connected, AMBER means a
100Base-T device is connected. When information is being sent over the
port, the LED blinks rapidly.
OFF No Device is Linked to the Port
Green 10/100Base-T Device Connected
Blinking
(Orange or Green)
Port Activity
4.
This LED lights in GREEN to indicate that your modem is connected
properly to the Router. It blinks rapidly when information is being sent
over the port between the Router and the modem.
OFF No WAN Link
Solid Green Good WAN Link
Blinking Green WAN Activity
5.
This unique LED shows you when the Router is connected to the
Internet. When the light is OFF, the Router is NOT connected to the
Internet. When the light is blinking, the Router is attempting to connect
to the Internet. When the light is solid GREEN, the Router is connected
to the Internet. When using the “Disconnect after x minutes” feature,
this LED becomes extremely useful in monitoring the status of your
Router’s connection.
OFF
Router is not Connected to
the Internet
Blinking Green
Router is Attempting to Connect to
the Internet
Solid Green
Router is Connected to
the Internet
Downloaded from www.Manualslib.com manuals search engine