zappi Pedestal Installation Guide Pioneer Business Park, Faraday Way, Stallingborough, DN41 8FF | myenergi Ltd. | Registration No. 10261262 D3470 03 33300 1303 | www.myenergi.com June 2022, Revision 1.
1. Product Overview The zappi Pedestal is designed for mounting the zappi EV charger. It can accommodate either a single zappi or two zappis mounted back to back. 2. Purpose of this document These installation instructions contain the information required to ensure correct and safe installation. These instructions should be read fully and understood before you begin installation and should be retained for the lifetime of the product. 3.
5. Box contents 1nr zappi Pedestal b 6nr M6 x 25 Button Head Socket Screws (3nr per side – Come as part of pedestal) b 2nr grommets (1nr per side) b 1nr Installation Guide b 6. Appearance 7. Installation Observe the safety information provided in section 4. In addition to these installation instructions follow and comply with the local regulations relating to operation, installation and environmental protection.
Suitable 10mm Fixings (To be determined by installer based on substrate depth etc.) 4mm Allen Key/Hex Key Cabling tools General tools, drill etc. For fixing base plate to concrete substrate. For mounting of the zappi EV charging station. For making all connections For mounting of the pedestal. 7.2 Location requirements If pedestal is installed in close proximity of a road or public parking place an adequate collision barrier/guard/protector must be installed.
Step 4: Fix base plate of pedestal down to substrate using fixings suitable for thickness and material, as necessary. Step 5: Remove screws from head of pedestal and keep safe for later use. Step 6: Refer to mounting instructions in “zappi Operation and Installation Manual”. Note: Use screws supplied with pedestal. Use washers supplied with zappi charger. Step 7: Make electrical connection as per instructions in “zappi Operation and Installation Manual”.
8. Maintenance, cleaning and repair 8.1 Maintenance The pedestal does not require any maintenance. 8.2 Cleaning DANGER High voltages – Danger of fatal electric shock Never clean the pedestal with a high-pressure cleaner or similar device. Clean the installation only with a dry cloth. Do not use aggressive cleaning agents, wax or solvents. b NOTE Do not use alkaline cleaning agents. Alkaline cleaning agents can cause a discolouring of the pedestal. b Tree resin could also cause discolouration. b 8.
11. Technical Data Specification Details Weight (kg) Material Corrosion Protection Colour Dimensions 8.3kg Aluminium Powder coated RAL 9005 (Black) See figures 1 and 2 below Figure 1 - Pedestal Pioneer Business Park, Faraday Way, Stallingborough, DN41 8FF | myenergi Ltd. | Registration No. 10261262 D3470 Figure 2 - Base 03 33300 1303 | www.myenergi.com June 2022, Revision 1.
12. Technical Support If you experience any issues during or pedestal set-up, please contact our technical support team by scanning the QR Code below. https://myenergi.com/manual-support/ Please contact us directly for the quickest solution. Pioneer Business Park, Faraday Way, Stallingborough, DN41 8FF | myenergi Ltd. | Registration No. 10261262 D3470 03 33300 1303 | www.myenergi.com June 2022, Revision 1.
