User Manual
Table Of Contents
- 1. Introduction
- 2. Safety
- 3. Disposal
- 4. Copyright
- 5. Overview
- 7. Operation
- 8. Display
- 9. Operating Modes
- 10. Manual Boost
- 11. Boost Timer
- 12. Configuration Settings
- 13. Advanced Settings
- 14 Linked Devices
- 15 Fault Codes
- 16 Warranty
- 17 Product Registration / myaccount
- 19. Technical Support
- 20. Declaration of Conformity
Page 7 of 24
6. Box Contents
1 x eddi unit with mounting bracket attached
1 x Current transformer with 5m cable (Grid CT sensor)
2 x Antenna
1 x Quick Start Guide
1 x vHub & WiFi Operation Manual
4x screws (for use on cable clamps)
6.1 Optional: Relay & Sensor Board
The relay sensor board is an optional add-on to the eddi and allows the use of multiple wiring configurations.
It includes:
Relays with a capacity for 16A
Two temperature sensor units (PT1000)
eSense input (isolated detection for economy tariff)
The two relays can be independently set for several functions or set to operate as a pair.
These functions include:
Export/Import Threshold
Operate when heating and timed operation
De-stratification pump control
Fault signal for BMS systems