Specifications

6
Note: The MWT-S8 Transmitter features an Automatic Level Control (ALC) to provide distortion
free sound without concern for loud commercials or audio track spikes.
3. Insert the DC power plug into the DC power jack on the MWT-S8 and plug the AC power
adapter into an AC outlet. The power light on the MWT-S8 will turn “GREEN”. The unit is
now ON.
4. Turn on your audio source and adjust audio level. When the audio signal is being received
by the MWT-S8 transmitter at an acceptable level the AUDIO INDICATOR LIGHT will turn
GREEN.
5. When using TV’s with audio output, turn the speakers down or off.
(Consult your TV’s Owner’s Manual for Fixed and Variable Audio Output operation.)
6. When the audio drops BELOW an acceptable level for the Automatic Level Control (ALC)
the audio light will turn OFF. A flashing GREEN audio light does not require adjustment of
the audio source for normal operation. When an acceptable audio level returns to the unit,
the light will turn green again. A flashing GREEN light may happen during TV programs or
songs when audio is low or not present.
7. When NO audio level is present for longer than 30 seconds the audio indicator light will turn
OFF. (If no audio light is present, check the audio level in the receiving devise then confirm
all your audio cable connections and/or check the audio source equipment.)
8. When audio rises ABOVE the acceptable level for the Automatic Level Control (ALC) the
audio light will turn RED. If the audio light is RED for longer than 30 seconds, check and
reduce the settings of the source audio equipment.
9. The audio light may occasionally flash RED during some programming when audio levels
momentarily rise above acceptable levels. A flashing RED audio light does not need
adjustment of the audio for normal operation. When a continuous acceptable audio level is
returned to the unit, the light will turn green again. This may happen during some TV
programs or songs when audio levels spike naturally.
10. Use a MYE Entertainment 800MHz controller to verify audio transmission is complete.
Connecting the MWT-S8 to an Audio Source - cont
11. In keeping with R&TTE Directive 1999/5/EC if there is an interruption of the input audio for
longer than 4 minutes this transmitter will automatically switch to “low Power Stand-by”
mode. Indication the transmitter has entered Stand-by mode is a consistent flashing green
audio light.
Transmitting can be restored by reintroducing a constant audio signal into the transmitter for
longer than 5 seconds.
Stand-by Mode and Alert