Specifications

6
INPUT OUTPUT
LEFT
RIGHT RIGHT
LEFT
VIDEO
Audio Output
TV’s, VCR’s CD players, DVD players, Satellite and Radio Tuners can be used as audio sources for
the MWT-FM. All will require stereo RCA style audio output
jacks in order to use the supplied MYE
stereo audio cable. Audio sources that use different output jacks will require a different audio cable.
To use a TELEVISION as an audio source for the MWT-FM transmitter, the TV must have “Audio
Output Jacks.” Televisions with this capability may come with either “Fixed” or “Variable” audio
output. Please consult your television Owner’s Manual as to their operation.
Connect the Transmitter
1. Using the stereo audio cable supplied, connect one end into the left and right audio
OUTPUT jacks of the audio source.
2. Plug the other end of the audio cable into the left and right audio INPUT jacks on the
MWT-FM transmitter.
Connecting the MWT-FM to an Audio Source
TV REAR JACK PANEL
EXAMPLE: TRANSMITTER TO TV CONNECTION
“Locking” the Frequency Selector
Once the frequency is selected it can be locked-in to avoid accidental or unwanted adjustments.
LOCK
: Press and HOLD down the Frequency UP and Frequency DOWN buttons for 3 seconds. “Loc”
will appear in the LED display. The frequency selector is now locked and cannot be changed. Upon
power down the unit will power up to the locked frequency.
UNLOCK
: Press and HOLD the Frequency UP and Frequency DOWN buttons for 3 seconds. “uLoc”
will appear in the LED display. The unit is now unlocked and the frequency can be changed. Upon
power down the unit will power up to the last frequency it was set at.