User manual

Visionari Limited Liability Company Visionari Copyright(1.4)2010Version
http://www.mydepots.com
34
8308R Series Network DVR User Manual
Picture4.6 set the time section
【interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval.
【alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is
turned on.
【delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds.
【recording channel】Choose the recording channel (multiple option supportive). Trigger the video signal
when the alarm is turned on.
Note：Set in the [recording setup] and perform the linkage recording. Start detecting video files in the
corresponding time section.
【alternate patrol】■ means that the selective channel is single window alternate patrol preview. The interval
is set in the [system setup] > [alternate patrol].
【PTZ linkage】Set the PTZ linkage when the alarm is turned on.
Note：PTZ linkage is set in the [shortcut menu] >[ PTZ control]. Set the patrol between spots, trail patrol
and so on.
图 4.7 云台联动