User Manual

MY200-SERIES P&P SPECIFICATION – MY200HX
COMPONENT RANGE
HIGH PRECISION MOUNTHEAD – MIDAS
Component Range Chip (from 01005), SOIC, SOT, SOD, TSOP, MELF, CSP, QFP (low profile), BGA (low profile),
DPAK, flip chip, odd shape
Component Specification Min: 0.4 x 0.2 mm (0.016” x 0.008”) (01005)
Max: 56 x 56 x 2.54 mm (2.20” x 2.20” x 0.10”)
Max: component weight: 140 g
(1)
1) Depending on mounthead, mount tool, package, and production altitude.
HIGH SPEED MOUNTHEAD – HYDRA Z8
Component Range Chip (from 0201), SO16, SOT223, MELF, SOD, TSOP
Component Specification Min: 0.6 x 0.3 mm (0.02 x 0.01”) (0201)
Max: 18.6 x 18.6 x 2.54 mm (0.73 x 0.73 x 0.10”) (PLCC44)
ELECTRICAL VERIFIER (OPTIONAL)
Component Range Resistor, Capacitor, Unipolar Capacitor, Diode (forward voltage, reverse current),
Zener diode (voltage drop), Transistor (current gain)
Verification Time On-the-fly
VISION CAPABILITY
DUAL VISION SYSTEM (OPTIONAL)
component type camera max active field of view min pitch min lead width
Leaded Components SVC
(1)
56 x 52 mm
(2.20” x 2.04”)
0.40 mm (16 mil) 0.20 mm (8 mil)
HRC
(2)
15 x 15 mm
(0.59” x 0.59”)
0.10 mm (4 mil) 0.05 mm (2 mil)
Bumped Components SVC
(1)
56 x 52 mm
(2.20” x 2.04”)
0.50 mm (20 mil) 0.25 mm (10 mil)
HRC
(2)
15 x 15 mm
(0.59” x 0.59”)
0.16 mm (6.3 mil) 0.08 mm (3.1 mil)
LINESCAN VISION SYSTEM
component type camera max active field of view min pitch min lead width
Leaded Components LVC
(1)
56 x 56 mm
(2.2” x 2.2”)
0.20 mm (8 mil) 0.10 mm (4 mil)
Bumped Components LVC
(1)
56 x 56 mm
(2.2” x 2.2”)
0.30 mm (12 mil) 0.15 mm (6 mil)
1) Standard vision camera in dual vision system (DVS).
2) High resolution camera in dual vision system (DVS).
1) Line scan vision camera.
FEEDER CAPACITYPLACEMENT SPEED AND ACCURACY SYSTEM FEATURES
SYSTEM FEATURES MY200HX
On-the-fly mount order optimization
Vision autoteach with snap-to-grid
Automatic illumination settings
Intelligent feeder concept – Agilis
Automatic feeder and component recognition
On-the-fly feeder loading
Dynamic feeder positions
Automatic board stretch compensation
Automatic conveyor width adjustment
Intelligent surface impact control
Tool collision avoidance
Multi-user, multi-tasking system software
Open software interfaces for factory integration
SQL database engine
Programmable light settings fiducial camera
PLACEMENT SPEED AND ACCURACY – MY200HX 10/14
Rated Speed
(1)
50 000 CPH
IPC 9850 Chip Net Throughput
(2,3)
40 000 CPH
IPC 9850 Chip Tact Time
(3)
0.080 s
IPC 9850 Chip Repeatability 3s (X, Y, Theta)
(3)
30 µm, 1.8°
(6)
45 µm, 1.8°
IPC 9850 Chip Accuracy @ Cpk = 1.33 (X, Y, Theta)
(5)
50 µm, 2.6°
(6)
75 µm, 2.6°
IPC 9850 Fine Pitch Net Throughput
(2,4)
4 500 CPH
IPC 9850 Fine Pitch Tact Time
(4)
0.700 s
IPC 9850 Fine Pitch Repeatability 3s (X, Y, Theta)
(4)
21 µm, 0.05°
IPC 9850 Fine Pitch Accuracy @ Cpk = 1.33 (X, Y, Theta)
(4,5)
35 µm, 0.09°
The above specification achieved with a machine configuration including high precision mounthead (Midas),
high speed mounthead (HYDRA Z8), line scan vision system (LVS) and inline conveyor T4.
The IPC 9850 net throughput and accuracy numbers are obtained simultaneously, with the same machine settings.
The rated speed value is obtained under conditions optimized for speed.
1) Depending on component and application.
2) According to IPC 9850. Net Throughput = (no of parts x 3600) / (board build time + board transfer time).
3) According to IPC 9850 0402C verification panel.
4) According to IPC 9850 QFP64/QFP100 verification panel.
5) According to IPC 9850 Cpk 1.33 = 4s + offset.
6) Small chip settings, recommended for 0201 (0.6 x 0.3 mm) and below.
BOARD HANDLING
INLINE CONVEYOR
t4
Maximum Board Size 575 x 508 mm (22.6" x 20")
Maximum Board Size with ML adaptor
(1)
554 x 443 mm (21.8" x 17.4")
Minimum Board Size
(2)
70 x 50 mm (2.7" x 2")
Board Thickness Range 0.4 - 6.0 mm (0.016" - 0.24")
Board Edge Clearance Top and Bottom 3.2 mm (0.13")
Top Side Clearance (max) 2.54 mm (0.10")
Bottom Side Clearance (max) 32 mm (1.25")
Maximum Board Weight 8 kg (17 lbs)
Board Transfer Height Conforms to SMEMA standard for board transfer height.
Height adjustable from 892 to 987 mm (35.1” to 38.9”).
Operation Mode Inline, manual, inline odd-board, left-to-right / right-to-left.
1) Optional. Suitable for irregular sized and odd shaped boards.
2) Recommended board train specification: 90 x 50 mm (3.5” x 2”) board size, 1.6 mm (0.06”) thickness.
FEEDER CAPACITY 8 MM TAPE
t4
MY200HX-10 96
MY200HX-14 160