User manual

www.mycricket.com
Using Cricket Broadband Connect
24 Using Cricket Broadband Connect
In the Internet Connection section, click the “Manually” button and then you can set up the disconnection:
1. Check the box.
2. Then click the corresponding radio button to define specific amount of time or data.
3. Use the scrolling list to select amount of minutes or Mb.
In the NDIS section, you can connect to the data network over modem or over NDIS. Check the box to use NDIS.
Move to another tab if necessary or click the OK button to confirm your choice. You can also set to connect automatically when the application starts and if the connection fails.
OPTIMIZATION TAB
The third option allows users to change the optimization status.
1. Then click the radio button of Enable or Temporary disable to activate the Optimization status.
2. Click the levels (High, Medium, Low) in Settings to set the Optimization speed.
MISCELLANEOUS TAB
The last section displays the start up features. Here you can select to start Connection Manager on Windows boot along with the ability to start the application minimized.
Launch Cricket Broadband Connect at Startup: Automatically launches Cricket Broadband Connect whenever you start your computer.
Start minimized:
When you minimize the application it will now show in the Windows task bar. To restore the application click on the Cricket Broadband Connect tray icon.
Automatically run Cricket Broadband Connect when device is inserted