Instruction manual

8.0 Maintenance Guide
8.5 Cleaning
Before cleaning inside machine, turn off and lockout power, page 5.
Hydraulics
1. The vent fan should be wiped off weekly to maintain maximum cooling of the hydraulic
system.
2. The hydraulic manifold, fittings, and hoses should be wiped off weekly to maintain maximum
cooling. Remove then replace panels as necessary.
Table
1. The front table should be wiped down periodically. Use a non-abrasive cleaner along with a
protective wax.
2. The rear table cover and front guard (if equipped) may be cleaned with glass cleaner or a
mild water based detergent. Some petroleum-based solvents may damage the plexiglass.
Console
1. The console should be cleaned with a mild water based detergent applied to a damp cloth or
paper towel. Petroleum based solvents will damage the console.
Machine Exterior
1. The machine’s exterior should be cleaned with a non-abrasive water based detergent applied
to a damp cloth.
2. Always be careful when cleaning around safety warning labels. Use limited amounts of
cleaners in those areas.
49