Service manual

1
1. PS-P61 Specifications
Product Staple and Punch Unit for QC-P8/P10
Integrated Model QC-P8, QC-P10
Jobs A4 : Corner Staple, Top Staple, and other Side Corner Staple
A3: Corner Staple
NOTE - Only corner staple can be done with optional punch.
- Two hole punch (option) can be performed only on A4 size.
Sheet Size with Operation Panel
A4 and A3
NOTE - Sheet size must be within +,-0.5 mm.
Sheet Size Width : Maximum 298 mm (11.8") Minimum : 182 mm (7.2")
Length : Maximum 432 mm (17") Minimum : 257 mm (10.2")
NOTE - Other side corner staple and top staple are limited in size.
Sheet Quality Normal Paper
Stapling and Punching Thickness
10 Sheets of 135 gsm (36# Bond)
Sheet Thickness 53 to 135 gsm (16# Bond to 36# Bond)
Optional Punch Capacity
Up to 105 gsm of normal paper
Production Speed 25 Sets/min. (Corner Staple)
15 Sets/min. (Top Staple, Other Side Corner Staple and Staple with Punch)
Transport Method Connecting Section : Roller Transport
Producing Section : Belts Transport
Detector Sheet Jam, No Staple, Door, Staple Trouble, Punch Trouble, and Full Tray
(LEDs illuminate on operation panel.)
Counter 4 digits (For Maintenance)
Drive DC Motor : 3 x 24 V DC Solenoid : 4 x 24 V/35 W
DC Motor : 1 x 24 V (with Punch)
Power 100 V 50/60 Hz, 115 V 60 Hz, 230 V 50 Hz
Power Consumption
150 W
Machine Dimensions
Tray Open : 1,115 x 562 x 582 mm (43.9" x 22.2" x 22.9")
Tray Close : 775 x 562 x 580 mm (30.6" x 22.2" x 22.9")
Machine Weight 77 kg (170 lb)
(W x D x H)